Working of centrifugal Pumps

Centrifugal pumps are used to transport fluids by the conversion of rotational kinetic energy to the hydrodynamic energy of the fluid flow. The rotational energy typically comes from an engine or electric motor. The fluid enters the pump impeller along or near to the rotating axis and is accelerated by the impeller, flowing radially outward into a diffuser or volute chamber (casing), from where it exits.

centrifugal pump converts input power to kinetic energy by accelerating liquid in a revolving device – an impeller. The most common is the volute pump – where fluid enters the pump through the eye of the impeller which rotates at high speed

 

 

Monoblock
Monoblock

Open well Monoblock Pumps

 

We are well established as one of the leading manufacturers and exporters of Three Phase Centrifugal Monoblock Pumps. Our pumps are compactly integrated with the appropriately mounted pump and prime-mover on the same shaft. These pumps are assembled by using high quality components and materials Mostly used in a wide range of voltage, these Three Phase Centrifugal Monoblock Pumps are available at discounted prices

 

Applications:

  • Domestic & Industrial Water Supply.
  • Sprinkler & Drip Irrigation.
  • Fire Fighting Application.
  • Water Treatment Plant.
  • Gardening,

 

Technical specification:

 

 

 

 

a) Centrifugal Mono block:

Power range : 0.5 Hp to 2.0 HP : 240 v, 50 hz .A.C. 1

phase Speed : 2880

Discharge : 33 LPM to 900 LPM

Total head range: 6 meters to 28 meters

Pipe size : 25 X 25 , 32 X 25, 40X 40,50X 40

Suction capacity: 7 meters

Sealing : Mechanical seal

 

Monoblock
Monoblock

 

b) Centrifugal slow speed self priming

Power range : 0.5 Hp to 1.0 HP : 240 v, 50 hz .

phase Speed : 1440 rmp

Discharge : 18 LPM to 50 LPM

Total head range: 6 meters to 36 meters

Pipe size : 25 X 25 ,

Suction capacity : 7 meters

Sealing : Mechanical seal

 

 

open well
open well

 

Openwell Pumps

 

This single stage centrifugal pumps are ideally suitable for open wells, where there is wide fluctuation in water level. It rest at the bottom of the well, so priming and suction problems do not arise. Prime mover is water filled fully rewind able and water cooled. Dynamically balanced rotor and statically balanced Impeller maintains clearance for better efficiency and frictionless working

Salient Features of Horizontal Open well Pumps

  • Rotating parts are dynamically and statically balanced for uniform clearance.
  • Bi-axially oriented synthetic film insulated winding wires.
  • Core with low watt loss laminations.
  • Stainless steel body for longer life.
  • Low power consumption.
  • Cast Iron Impeller with high head as well as discharge

Application of Open well Pumps ›

  • Domestic and village water supply schemes.
  • Drip and sprinkler irrigation.
  • Industrial purposes, Hospitals, Gardens.
  • River and canal lift irrigation.
  • Drinking water supply.
  • Small farms and Hotels.

 

Technical  Specification of  Open well submersible pump

Power range : 0.5 Hp to 2.0 HP : 240 v, 50 hz .A.C. 1

phase Speed : 2880 rmp

Discharge : 12 LPM to 370 LPM

Total head range: 6 meters to 30 meters

Pipe suction In mm ( Suction x delivery): 25MM,40MM,50MM

 

Please e-mail at [email protected]   for more information

 

 

[vfb id=2]